Mar 01, 2023 Leave a message

What if the remote control of a children's off-road vehicle breaks down?

1. The main reason for the insensitivity of the remote control is that the frequent friction of the control switch will produce a layer of oxide film, resulting in poor contact and thus affecting the sensitivity, as long as we clean it up.
2. Before maintenance, the battery of the remote control needs to be removed to avoid damage to the circuit during maintenance.
3. Use a screwdriver to unscrew the rear shell of the remote control, and then unscrew the internal circuit board screws to take it off.
4. Dip a little alcohol with a cotton swab, and then drop it into the movable wheel of the control switch on the circuit board.
5. Do not use it immediately after adding alcohol. At the same time, you need to move the remote control button several times, which is conducive to cleaning the internal dirt.
6. After turning it a few times, it needs to be aired in a warm place for about an hour. It can be used only after the alcohol is fully dried. If you have a multimeter, you can use the resistance gear to measure whether the contact of the remote control button is normal. It can be used after normal.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry